Tuesday, 30 December 2014
Tuesday, 23 December 2014
What is the Main Tools and Market value of DNT Tools?
What is the Main Tools and Market value of DNT Tools?
DNT Tools(name is DongNing Tools(ningbo) Co.,Ltd) is a Chinese factory and exporter in auto tools about 15 years.
No.1 The history of DNT Tools
No.3 Market Value：
Market postioning: Middling and High Level Market
Up to now,Main market:West Europe,Russia,Northern American,Austrialia
Ways: Meterial: SAE 5140 or SAE 1045
Technic: Drop Forge
Heat Treatment: 38--42 hardness
Surface Treatment: smooth,Suit for sale to engd customer
Packing: BMC or Color Carton or Slid Card with Specification.
Now, All our tools is close to Taiwan Tools in quality.but the price is cheaper than Taiwan.
Are you looking for a good suppliers in China?Pls,contact us.
mail:info@nbdntools.com
facebook: DNT Auto Tools
twitter: dnttools@gmail.com
DNT Tools(name is DongNing Tools(ningbo) Co.,Ltd) is a Chinese factory and exporter in auto tools about 15 years.
No.1 The history of DNT Tools
Jan 1,2000, Renyong Special Tools (Ningbo) Co.,Ltd is found in Ningbo City by David and ricky.Company manufacute screwdriver,impact bit set.
Nov 12,2008 , Renyong Special Tools (Ningbo) Co.,Ltd is renamed to Dongning Tools (ningbo) Co.,Ltd, company accept OEM&ODM with grease gun and accessories,auto special tools.
Jan 1,2009 , The export business is beginning,comany start to accept the order by themselves.
May 1,2009, Enlarge their workshop to 3,000 square
Nov 1,2011, Increase 1*workshop(forging workshop),Manufacturing the tool from raw material to finish by themselves.
Jan 15,2014, Moving into New factory,and workshop is 9,000 square,and producting about hundreds kinds of tools.
No.2 Main Tools:
DNT Tools' products are include Puller Tools,Under Car Tools,Engine Tools,And Oil Seriver Tools 4 series.
Puller Tool: Gear Puller,Bearing Puller/separator/splitter,Ball Joint Separator/removal tool,wheel bearing removal tool,and harmonic balance puller tools
Under Car Tools:Brake caliper tools,coil spring compressor
Engine Tools:Engine Timing Tools, oil filter wrench,valve spring compressor and piston ring tool,
Oil Service Tools: oil drain plug key set and grease gun
No.3 Market Value：
Up to now,Main market:West Europe,Russia,Northern American,Austrialia
Ways: Meterial: SAE 5140 or SAE 1045
Technic: Drop Forge
Heat Treatment: 38--42 hardness
Surface Treatment: smooth,Suit for sale to engd customer
Packing: BMC or Color Carton or Slid Card with Specification.
Now, All our tools is close to Taiwan Tools in quality.but the price is cheaper than Taiwan.
Are you looking for a good suppliers in China?Pls,contact us.
mail:info@nbdntools.com
facebook: DNT Auto Tools
twitter: dnttools@gmail.com
Thursday, 18 December 2014
Top Chinese manufacturer and supplier of auto tools-Dongning Tools(Ningbo) Co.,Ltd[DNT Tools]
 |
| factory and office of DNT Tools(auto tools) |
Dongning Tools （Ningbo） Co., Ltd. is a professional auto
repair tools manufacturer. It has more than 10 years of tools production experience and 6 years
of exporting experience specialized in engine tools, under-car tools, oil
service tools, puller tools, general tools and car caring tools.
Our company is located in Ningbo City, It's a good Port city in China.
"Rigorous, efficient, practical, and
innovative" is all staff's consistent line, with the strong technology,
exquisite technology, high-precision production equipment. Now our products
have gained a fabulous reputation in the past decades on several regions,
Southeast Asia, South America and Europe and
have been deeply trusted and praised by customers.
Our ethos of quality products at
competitive prices with a professional back-up service is renowned for being
the best in the business. We operate a direct line service
 |
| sample room and workshop of DNT Tools(auto tools) |
-when you phone 8 6 – 5 7 4 – 8 8 2 9 8 6 9 6
you get straight through to an experienced advisor who can give instant
availability, pricing and technical information.
Please pay more attention on DNT tools, we
believe we can do good business together; DNT Tools will be the first choice of
the highest tools buyers.
We beat with best for you. Affections begin
form the first touch.
If you are looking for a good Chinese supplier or exporter,Pls contact us.
mail:info@nbdntools.com web: www.nbdntools.com
 |
| our show 2013 and loading tools |
 |
| sales team of DNT Tool |
Saturday, 13 December 2014
Top 10 Brands in automotive tools in China
No.1
Bosch
This is German Brand, found on 1886s,they focus
on power tools, Measuring tool,garden tools, pneumatic tool and auto accessories
and parts.
No.2
Stanley
this is American Brand,found on 1843s,they
focus on tool box,power tools,pneumatic tools,socket,spanner,pliers,and hammers.
No.3 Beta
It’s Italian Brand found on 1939 ,They are focusing
on mobile roller cab,tool trolley and box,digital vernier,water proof,compact
rechargeable insoection lamp,hydraulic jack,oil filter tool for gear boxes.
No.4 SATA
It’s American Brand(APEX Tool),they are specialing
in ratcheting wrench,socket tool,impact socket,wrench,torque tools,pliers,screwdriver,hex
key, hammer,tool storage
No.5
Snap on
It’s American Brand,specialing in hand
tools,power tools,tool storage,diagnostics tool,shop&tech tools web:
It’s a Chinese Brand,specialing in
mechanics tools,tools bag,electrical tools,hydraulic tools,holding
tools,fastening tools,cutting tools,measuring tools,striking tools,drilling
tools,pipe tools,auto tools and air tools
No.7
DNT
It’s a Chinese Brand,specialing in brake
caliper tool,coil spring compressor,bearing puller,gear puller,ball joint
removal tool,and wheel bearing removal tool,bearing separator
It’s a Chinese Brand,found on
1999s,specialing in screwdriver,bits,socket,wrench,hex key,tool
storage,pliers,cutting tools,measuring tool.,electronic tools
No.9 Endura
It’s a brand of the Textron,specialing in
hydraulic tools,safety tools,cutting tools,construction tools,welding
tools.impact tools,torque tools,pliers,screwdriver,wrenches,sockets,tool box,
and tool trolleys
No.10 Spx-OTC
It’s a American brand of Spx,focus on diagnostics
tools,shop equipment,auto specialty tools
Wednesday, 10 December 2014
Tuesday, 2 December 2014
Automotive tools‘ Category
Automotive tools' category
automotive tools can divid general tool and special tool.
The general tool include Hammers, Pliers,Screwdrivers,bit set,Wrench,Spanner.
The special tool contain Spark plug sleeve, piston ring clamp, valve spring tongs, grease guns, lift,coil spring compressor,oil filter wrench,ball joint remover/separator,.wheel bearing puller,gear and bearing puller,disc brake caliper piston tool and engine timing tools
General Tools:
Hammers: Consists of handle and hammer,hammer weight:0.25kg、0.5kg、0.75kg、1kg and so on.Round and square is the usual shape.Handle length:320~350MM
Screwdrivers,bit set: used to tighten or loosen the tool slotted screws. Screwdriver points wooden handle screwdriver, mandrel screwdriver, screwdriver handle clip, screwdriver Phillips screwdriver, Screwdriver specifications (Minister pole) Score: 50 mm, 65 mm, 75 mm, 100 mm, 125 mm, 150 mm, 200 mm, 250 mm, 300 mm and 350 mm
Pliers: pliers is a lot of phyletic, auto repair commonly used lithium fish clamp and needle nose pliers.
1, the slip joint pliers: clamping flat or cylindrical parts with the hand, with a blade can cut metal. Use, wipe on the pliers oil, to avoid slippage when working. After clip parts, bending or twisting cut again; Amplify the jaw clamping large parts. Can't turn screw bolt or nut with forceps.
2, long nose pliers: used for clamping parts in small places.
Wrench:Fold edges equipped with bolts and nuts. Auto repair commonly used open-end wrench, wrenches, socket wrench, adjustable wrench, torque wrenches, pipe wrenches and special wrench.
1, open-end wrench: There are six opening width within the range of 6 to 24 mm. Applicable to the general standard folding fitted bolts and nuts.
2, wrench: for unloaded from 5 to 27 mm range of bolts or nuts. Each wrench has two kinds of 6pc and 8pc. Both ends of the sleeve-like wrenches, there are 12 angles, can the head of the bolt or nut trap, easy to slip at work. Some bolts and nuts restricted ambient conditions, plum pull particularly applicable.
3, the socket wrench: Each has 13pc, 17pc and 24pc Applicable to places unloaded bolts and nuts due to the location constraints, ordinary wrench can not work. When folded loaded bolt or nut, may need to use a different socket and handles.
4, adjustable wrench: the opening of such a wrench can be freely adjusted for irregular bolts or nuts. When in use, should be adjusted to the jaw and bolt or nut width distance to the edge, and it snapping, let wrench movable jaw thrust bear, bear a fixed jaw tension. Wrench length 100 mm, 150 mm, 200 mm, 250 mm, 300 mm, 375 mm, 450 mm, 600 mm several.
5, the torque wrench: for mating sleeve tighten bolts or nuts. The torque wrench in the car repair is indispensable, as the cylinder head bolts, bolts and other fastening crankshaft bearings are required to use a torque wrench. Auto repair using a torque wrench, the torque of 2881 Newton meters special wrench: or said ratchet wrench with socket wrench should be used. Generally used bolt or nut tightening in narrow places or demolition, it may not be able to change the angle wrench dismantle or mounting bolts or nuts.
The Special Tool
(A) spark plug spark plug socket sleeve for the disassembly of the engine spark plugs. Hexagonal inner sleeve edge size of 22 to 26 mm with, for off loading 14 mm and 18 mm spark plugs; inner sleeve on the side of 17 mm hexagon for unloaded 10 mm spark plugs.
(B) unloading piston ring pliers for piston ring clamp loading unloading engine piston rings, piston rings to avoid discontinuity and split off. When used, the piston rings stuck piston ring clamp loading opening, Qingwo handle, slowly shrink, piston rings slowly open, the piston ring or split out into the ring grooves.
(C) valve spring clamp pliers for loading and unloading valve spring. When used, the jaws shrink to the minimum position, insert the valve spring seat, and then rotate the handle. His left hand firmly pressed forward, the jaws snapping spring seat, after handling good air lock (pin) chip, in the opposite direction of rotation of the valve spring loading handle, remove the clamp loading and unloading.
(D) the grease gun grease gun for grease lubrication points raised by the nozzle, the pressure valve, piston, into the hole, head, levers, springs, rod and other components. When using a grease gun, loaded with oil storage cylinder grease small group small group, the exclusion of air. After decorating, tighten the cap can be used. When greasing glib, glib response are not skewed. If not into the oil, should stop oiling, check nozzle clogging.
(E) jack screw jack has extremely heavy items, hydraulic jacks and hydraulic lifters. Car used hydraulic jacks. Jack lifting force is 3 tons, 5 tons, 8 tons and so on. Hydraulic jacks for lifting vehicles and other heavy objects. Its structure consists of the top block, screw rod, oil storage cylinder, cylinder, shake the handle, oil pressure plunger, barrel, and out of the oil valves, valve, such as plug and housing components. Before using the jack, with a triangular wooden pad good car; when used on loose surfaces, should be added to the jack under the skids; when lifting, heavy vertical jack should be positive; extremely heavy items are not supported when the former prison and fall, is prohibited working in the car. When using the jack, the first switch and tighten, place the jack on being the top position, the pressure of the movable handle, it will be heavy from the top. When fall jack, slowly unscrew the switch, weight gradually decreased.
(F) coil spring compressor, 355MM,400MM,250MM is the common sizes.coil spring compressor is used to compress coil spring to change suspension
(G)oil filter wrench, According the point and size,choose the right oil filter wrench,such as point:14 size:65mm used for TOYOTA,NISSAN
(H) ball joint remover/separator, used for separating or removing ball joint ,steering wheel,and harmonic balancer,bearing or gears
(J ) wheel bearing puller,gear and bearing puller, used for removing or pulling wheel bearing,bearing,gear,for car or light truck
(K) disc brake caliper piston tool,used for change brake pad,brake shoe,brake caliper.
(L) engine timing tools,apply to timing locking,camshaft belt timing locking. every engine,every brand car,must choose the right timing tools.
automotive tools can divid general tool and special tool.
The general tool include Hammers, Pliers,Screwdrivers,bit set,Wrench,Spanner.
The special tool contain Spark plug sleeve, piston ring clamp, valve spring tongs, grease guns, lift,coil spring compressor,oil filter wrench,ball joint remover/separator,.wheel bearing puller,gear and bearing puller,disc brake caliper piston tool and engine timing tools
General Tools:
Hammers: Consists of handle and hammer,hammer weight:0.25kg、0.5kg、0.75kg、1kg and so on.Round and square is the usual shape.Handle length:320~350MM
Screwdrivers,bit set: used to tighten or loosen the tool slotted screws. Screwdriver points wooden handle screwdriver, mandrel screwdriver, screwdriver handle clip, screwdriver Phillips screwdriver, Screwdriver specifications (Minister pole) Score: 50 mm, 65 mm, 75 mm, 100 mm, 125 mm, 150 mm, 200 mm, 250 mm, 300 mm and 350 mm
Pliers: pliers is a lot of phyletic, auto repair commonly used lithium fish clamp and needle nose pliers.
1, the slip joint pliers: clamping flat or cylindrical parts with the hand, with a blade can cut metal. Use, wipe on the pliers oil, to avoid slippage when working. After clip parts, bending or twisting cut again; Amplify the jaw clamping large parts. Can't turn screw bolt or nut with forceps.
2, long nose pliers: used for clamping parts in small places.
Wrench:Fold edges equipped with bolts and nuts. Auto repair commonly used open-end wrench, wrenches, socket wrench, adjustable wrench, torque wrenches, pipe wrenches and special wrench.
1, open-end wrench: There are six opening width within the range of 6 to 24 mm. Applicable to the general standard folding fitted bolts and nuts.
2, wrench: for unloaded from 5 to 27 mm range of bolts or nuts. Each wrench has two kinds of 6pc and 8pc. Both ends of the sleeve-like wrenches, there are 12 angles, can the head of the bolt or nut trap, easy to slip at work. Some bolts and nuts restricted ambient conditions, plum pull particularly applicable.
3, the socket wrench: Each has 13pc, 17pc and 24pc Applicable to places unloaded bolts and nuts due to the location constraints, ordinary wrench can not work. When folded loaded bolt or nut, may need to use a different socket and handles.
4, adjustable wrench: the opening of such a wrench can be freely adjusted for irregular bolts or nuts. When in use, should be adjusted to the jaw and bolt or nut width distance to the edge, and it snapping, let wrench movable jaw thrust bear, bear a fixed jaw tension. Wrench length 100 mm, 150 mm, 200 mm, 250 mm, 300 mm, 375 mm, 450 mm, 600 mm several.
5, the torque wrench: for mating sleeve tighten bolts or nuts. The torque wrench in the car repair is indispensable, as the cylinder head bolts, bolts and other fastening crankshaft bearings are required to use a torque wrench. Auto repair using a torque wrench, the torque of 2881 Newton meters special wrench: or said ratchet wrench with socket wrench should be used. Generally used bolt or nut tightening in narrow places or demolition, it may not be able to change the angle wrench dismantle or mounting bolts or nuts.
The Special Tool
(A) spark plug spark plug socket sleeve for the disassembly of the engine spark plugs. Hexagonal inner sleeve edge size of 22 to 26 mm with, for off loading 14 mm and 18 mm spark plugs; inner sleeve on the side of 17 mm hexagon for unloaded 10 mm spark plugs.
(B) unloading piston ring pliers for piston ring clamp loading unloading engine piston rings, piston rings to avoid discontinuity and split off. When used, the piston rings stuck piston ring clamp loading opening, Qingwo handle, slowly shrink, piston rings slowly open, the piston ring or split out into the ring grooves.
(C) valve spring clamp pliers for loading and unloading valve spring. When used, the jaws shrink to the minimum position, insert the valve spring seat, and then rotate the handle. His left hand firmly pressed forward, the jaws snapping spring seat, after handling good air lock (pin) chip, in the opposite direction of rotation of the valve spring loading handle, remove the clamp loading and unloading.
(D) the grease gun grease gun for grease lubrication points raised by the nozzle, the pressure valve, piston, into the hole, head, levers, springs, rod and other components. When using a grease gun, loaded with oil storage cylinder grease small group small group, the exclusion of air. After decorating, tighten the cap can be used. When greasing glib, glib response are not skewed. If not into the oil, should stop oiling, check nozzle clogging.
(E) jack screw jack has extremely heavy items, hydraulic jacks and hydraulic lifters. Car used hydraulic jacks. Jack lifting force is 3 tons, 5 tons, 8 tons and so on. Hydraulic jacks for lifting vehicles and other heavy objects. Its structure consists of the top block, screw rod, oil storage cylinder, cylinder, shake the handle, oil pressure plunger, barrel, and out of the oil valves, valve, such as plug and housing components. Before using the jack, with a triangular wooden pad good car; when used on loose surfaces, should be added to the jack under the skids; when lifting, heavy vertical jack should be positive; extremely heavy items are not supported when the former prison and fall, is prohibited working in the car. When using the jack, the first switch and tighten, place the jack on being the top position, the pressure of the movable handle, it will be heavy from the top. When fall jack, slowly unscrew the switch, weight gradually decreased.
(F) coil spring compressor, 355MM,400MM,250MM is the common sizes.coil spring compressor is used to compress coil spring to change suspension
(G)oil filter wrench, According the point and size,choose the right oil filter wrench,such as point:14 size:65mm used for TOYOTA,NISSAN
(H) ball joint remover/separator, used for separating or removing ball joint ,steering wheel,and harmonic balancer,bearing or gears
(J ) wheel bearing puller,gear and bearing puller, used for removing or pulling wheel bearing,bearing,gear,for car or light truck
(K) disc brake caliper piston tool,used for change brake pad,brake shoe,brake caliper.
(L) engine timing tools,apply to timing locking,camshaft belt timing locking. every engine,every brand car,must choose the right timing tools.
Subscribe to:
Posts (Atom)