Wednesday 28 February 2018

How to Replace a Spark Plug in a Car?






 How to Replace a Spark Plug in a Car?

1. Wait for Your Car Engine to Cool Down

Finding a spark plug that fits your vehicle is simple. What I do is go to the spark plugs page on Amazon and enter my vehicle year, make and model into their "filter by vehicle" search.

If you skip this step, you might find it impossible to remove the spark plugs from your engine without ruining the threads. This is especially true for aluminium cylinder heads. While it is possible to repair a misthreaded spark plug hole, but it is difficult and should be left to a professional.

2. Blow Out Debris Around Spark Plugs

Blow off any dust, dirt or debris around and near the spark plug with a compressed air duster. The last thing you'll want is foreign particles falling DIRECTLY into your engine and possibly causing premature engine wear.

3. Make Sure Spark Plugs are Screwed in Straight

If spark plugs go in crooked, they can cross thread and you will have a problem. To make sure my spark plugs are screwed in straight, I like to wiggle them a bit as I'm inserting them in. If you notice the spark plug getting tight right at the beginning... then stop, take it out and restarting the screwing process.

4. Change Spark Plugs One at a Time

It is VERY easy to get the wires all mixed up, so just play it safe and do them one by one. If you have a car with a coil-on-plug system then this is not as much of a worry. Also, most all newer cars make it hard to put parts in the wrong place, but you have to be more careful with most older cars.

No comments:

Post a Comment